Digium AEX2400 — Logitel

IP TELEPHONY CARDS

Digium AEX2400

Digium AEX2400

Manufacturer:
Logitel code: 1AEX2400LF
Manufacturer code: 1AEX2400LF

Product Description

The Digium® AEX2400 is a full-length PCI-Express 1.0-compliant modular gateway card for connecting analog telephone stations and analog POTS lines through a PC.

It supports a combination of up to six quad port station (FXS) or trunk (FXO) modules for a total of 24 lines.

Using Digium's Asterisk software and standard PC hardware, one can create a telephony environment that includes all of the sophisticated features of a high-end business telephone system.

Using an industry-standard bursting, bus-mastering interface chip that is found within millions of PC systems worldwide, and Digium VoiceBus™ technology, the AEX2400 eliminates the requirement for separate channel bank and T1 interface cards, with industry-leading performance and price. The quad FXO and quad FXS modules are interchangeable, allowing the creation of any combination of interfaces. The optional hardware echo cancellation module provides 1024 taps (128 milliseconds) of echo cancellation for superior voice quality on both trunk and station interfaces. Scaling of this solution is accomplished by adding additional AEX2400 interface cards.

The Digium® AEX2400 is a full-length PCI-Express 1.0-compliant modular gateway card for connecting analog telephone stations and analog POTS lines through a PC.

It supports a combination of up to six quad port station (FXS) or trunk (FXO) modules for a total of 24 lines.

Using Digium's Asterisk software and standard PC hardware, one can create a telephony environment that includes all of the sophisticated features of a high-end business telephone system.

Using an industry-standard bursting, bus-mastering interface chip that is found within millions of PC systems worldwide, and Digium VoiceBus™ technology, the AEX2400 eliminates the requirement for separate channel bank and T1 interface cards, with industry-leading performance and price. The quad FXO and quad FXS modules are interchangeable, allowing the creation of any combination of interfaces. The optional hardware echo cancellation module provides 1024 taps (128 milliseconds) of echo cancellation for superior voice quality on both trunk and station interfaces. Scaling of this solution is accomplished by adding additional AEX2400 interface cards.

I'm interested in this product

Product Interest Form

Fill in the following form in order to get in touch with us about this product.

  • This field is for validation purposes and should be left unchanged.
  • 24 Modular Ports
  • 32-bit 33MHz
  • Analog Trunk or Station
  • Loop Start or Kewl Start Signaling
  • RoHS Compliant
  • Lifetime Warranty
  • Temperature: 0˚ to 50˚ C
  • Optional DSP Echo Cancellation

Minimum Hardware Requirement:

  • 800-Mhz Pentium III
  • 64MB RAM
  • Available PCI-Express slot

FXS modules provide ringing voltage and battery to telephones or handsets and require substantial amount of 12V DC power in order to operate properly. The PCI interface on motherboards cannot provide sufficient quantities of this voltage necessary to ring 4, 8 or 24 modules. As a solution, Digium analog cards are mounted with a 4-pin disk-drive or Molex connector on the base board. This connector must be supplied with an internal power connector from the system’s power supply if FXS modules are in use. For systems without available internal 12V power connectors, the PWR2400B is the solution.

  • Quad FXS Module (S400M)
  • Quad FXO Module (X400M)
  • Echo-cancelation Module (VPMADT032)
  • Power Supply (PWR2400B)
© 2024, KM LOGITEL Innovative Technologies SA. All rights reserved. Report a Problem
    X
    Welcome to Our Website
    Welcome to logitel
    Site SearchSend Us Email
    wpChatIcon