Digium TE405 — Logitel

IP TELEPHONY CARDS

Digium TE405

Digium TE405

Manufacturer:
Logitel code: 1TE405PF
Manufacturer code: 1TE405PF

Product Description

The TE405 is the next generation of Digium hardware that improves performance and scalability through bus mastering architecture.

The TE405 supports both E1, T1, J1 environments and is selectable on a per-card or per-port basis. This feature enables signaling translation between E1, T1, and J1 equipment and allows inexpensive T1 channel banks to connect with E1 circuits. Because the TE405 improves I/O speed by up to 10 times, the result is reduced CPU usage and increased card density per server.

Digium has designed the TE405 to be fully compatible with existing software applications and it is fully integrated with the Asterisk Open Source PBX/IVR platform. Also, the open source driver supports an API interface for custom application development. With the combination of Digium Hardware and Asterisk software, numerous combinations of telephony configurations are possible. From the traditional PBX to VoIP Gateways, Digium solutions are paving the way for a new generation of worldwide communications.

The TE405 supports industry standard telephony and data protocols, including Primary Rate ISDN (both N. American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes. Both line-side and trunk-side interfaces are supported, also included are advanced call features.

The TE405 is for use only with a 5.0 volt PCI slot. The TE410 is for use only with a 3.3 volt PCI slot - typically available on newer server motherboards and in 64-bit PCI bus architectures.

The TE405 is the next generation of Digium hardware that improves performance and scalability through bus mastering architecture.

The TE405 supports both E1, T1, J1 environments and is selectable on a per-card or per-port basis. This feature enables signaling translation between E1, T1, and J1 equipment and allows inexpensive T1 channel banks to connect with E1 circuits. Because the TE405 improves I/O speed by up to 10 times, the result is reduced CPU usage and increased card density per server.

Digium has designed the TE405 to be fully compatible with existing software applications and it is fully integrated with the Asterisk Open Source PBX/IVR platform. Also, the open source driver supports an API interface for custom application development. With the combination of Digium Hardware and Asterisk software, numerous combinations of telephony configurations are possible. From the traditional PBX to VoIP Gateways, Digium solutions are paving the way for a new generation of worldwide communications.

The TE405 supports industry standard telephony and data protocols, including Primary Rate ISDN (both N. American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes. Both line-side and trunk-side interfaces are supported, also included are advanced call features.

The TE405 is for use only with a 5.0 volt PCI slot. The TE410 is for use only with a 3.3 volt PCI slot - typically available on newer server motherboards and in 64-bit PCI bus architectures.

I'm interested in this product

Product Interest Form

Fill in the following form in order to get in touch with us about this product.

  • This field is for validation purposes and should be left unchanged.
  • 4 Ports E1/T1/PRI
  • 32-bit 33MHz
  • RJ48C Ports
  • Built-in CSU/DSU
  • RoHS Compliant
  • Lifetime Warranty
  • Temperature: 0 to 50° C
  • Optional DSP Echo Cancellation

Minimum Hardware Requirement

  • 800-Mhz Pentium III
  • 64MB RAM
  • Available 5.0v PCI Slot

Framing Types

  • Superframe (D4)
  • Channel Associated Signaling (CAS)
  • Common Channel Signaling (CCS)

Coding Types

  • Alternative Mark Inversion (AMI)
  • Bipolar with Eight (8) Zeros Substitution (B8ZS)
  • High Density Bipolar of Order Three (3) Code (HDB3). Optional Cyclic Redundancy Check 4 (CRC4)

Primary Rate Interface (PRI) Switch Types

  • National ISDN 1 (NI1)
  • National ISDN 2 (NI2)
  • Nortel DMS100
  • AT&T 4ESS
  • Lucent 5ESS
  • EuroISDN Q.931
  • Q.SIG (Limited Support)
  • Both PRI NET and PRI CPE are Supported

Signaling Types

  • E&M, E&M E1, E&M Wink
  • Feature Group D (DTMF)
  • Feature Group D (MF)
  • Feature Group D (Tandem Access)
  • Feature Group B
  • Feature Group C-CAMA
  • Feature Group C-CAMA (MF)
  • Foreign Exchange Station (FXS) Loop Start, Ground Start, Kewl Start
  • Foreign Exchange Office (FXO) Loop Start, Ground Start, Kewl Start
  • PRI Network and CPE
  • Echo-cancellation Module (VPMOCT128)
© 2024, KM LOGITEL Innovative Technologies SA. All rights reserved. Report a Problem
    X
    Glad to have you at Our Website
    Welcome to logitel
    Site SearchSend Us Email
    wpChatIcon