Digium TE410 — Logitel

IP TELEPHONY CARDS

Digium TE410

Digium TE410

Manufacturer:
Logitel code: 1TE410PF
Manufacturer code: 1TE410PF

Product Description

The TE410 is the next generation of Digium hardware that improves performance and scalability through bus mastering architecture.

The TE410 supports E1, T1, and J1 environments and is selectable on a per-card or per-port basis. This feature enables signaling translation between E1, T1, J1 equipment and allows inexpensive T1 channel banks to connect with E1 circuits. Because the TE410P improves I/O speed by up to 10 times, the result is reduced CPU usage and increased card density per server.

Digium has designed the TE410 to be fully compatible with existing software applications and it is fully integrated with the Asterisk Open Source PBX/IVR platform. Also, the open source driver supports an API interface for custom application development. With the combination of Digium Hardware and Asterisk software, numerous combinations of telephony configurations are possible. From the traditional PBX to VoIP Gateways, Digium solutions are paving the way for a new generation of worldwide communications.

The TE410 supports industry standard telephony and data protocols, including Primary Rate ISDN (both N. American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes. Both line-side and trunk-side interfaces are supported, also included are advanced call features.

Digium cards are smarter! Second-generation firmware for Digium multispan TE-series hardware PCI cards, provides several new features. These features allow Digium cards to do more work in hardware and leaving the server's CPU open to do other tasks, all of which contribute to less CPU overhead, and therefore improved performance, and more channels running through a single PC or server.

  • TDM channel alignment in hardware (instead of software), for greater voice integrity and reliability.
  • Master clock source distribution for synchronized timing across multiple cards, assuring synchronization of clocks and increasing reliability and quality of data transmission.
  • Zero-latency TDM direct hardware-level cross-connect
  • Support for new echo-cancellation module which further increases performance.
  • DTMF detection can be done in hardware with echo cancellation module.
  • Field upgradable firmware for future updates.

The TE410 is the next generation of Digium hardware that improves performance and scalability through bus mastering architecture.

The TE410 supports E1, T1, and J1 environments and is selectable on a per-card or per-port basis. This feature enables signaling translation between E1, T1, J1 equipment and allows inexpensive T1 channel banks to connect with E1 circuits. Because the TE410P improves I/O speed by up to 10 times, the result is reduced CPU usage and increased card density per server.

Digium has designed the TE410 to be fully compatible with existing software applications and it is fully integrated with the Asterisk Open Source PBX/IVR platform. Also, the open source driver supports an API interface for custom application development. With the combination of Digium Hardware and Asterisk software, numerous combinations of telephony configurations are possible. From the traditional PBX to VoIP Gateways, Digium solutions are paving the way for a new generation of worldwide communications.

The TE410 supports industry standard telephony and data protocols, including Primary Rate ISDN (both N. American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes. Both line-side and trunk-side interfaces are supported, also included are advanced call features.

Digium cards are smarter! Second-generation firmware for Digium multispan TE-series hardware PCI cards, provides several new features. These features allow Digium cards to do more work in hardware and leaving the server's CPU open to do other tasks, all of which contribute to less CPU overhead, and therefore improved performance, and more channels running through a single PC or server.

  • TDM channel alignment in hardware (instead of software), for greater voice integrity and reliability.
  • Master clock source distribution for synchronized timing across multiple cards, assuring synchronization of clocks and increasing reliability and quality of data transmission.
  • Zero-latency TDM direct hardware-level cross-connect
  • Support for new echo-cancellation module which further increases performance.
  • DTMF detection can be done in hardware with echo cancellation module.
  • Field upgradable firmware for future updates.
I'm interested in this product

Product Interest Form

Fill in the following form in order to get in touch with us about this product.

  • This field is for validation purposes and should be left unchanged.
  • 4 Ports E1/T1/PRI
  • 32-bit 33MHz
  • RJ48C Ports
  • Built-in CSU/DSU
  • RoHS Compliant
  • Lifetime Warranty
  • Temperature: 0 to 50° C
  • Optional DSP Echo Cancellation

Minimum Hardware Requirement

  • 800-Mhz Pentium III
  • 64MB RAM
  • Available 3.3v PCI Slot

Framing Types

  • Superframe (D4)
  • Channel Associated Signaling (CAS)
  • Common Channel Signaling (CCS)

Coding Types

  • Alternative Mark Inversion (AMI)
  • Bipolar with Eight (8) Zeros Substitution (B8ZS)
  • High Density Bipolar of Order Three (3) Code (HDB3). Optional Cyclic Redundancy Check 4 (CRC4)

Primary Rate Interface (PRI) Switch Types

  • National ISDN 1 (NI1)
  • National ISDN 2 (NI2)
  • Nortel DMS100
  • AT&T 4ESS
  • Lucent 5ESS
  • EuroISDN Q.931
  • Q.SIG (Limited Support)
  • Both PRI NET and PRI CPE are Supported

Signaling Types

  • E&M, E&M E1, E&M Wink
  • Feature Group D (DTMF)
  • Feature Group D (MF)
  • Feature Group D (Tandem Access)
  • Feature Group B
  • Feature Group C-CAMA
  • Feature Group C-CAMA (MF)
  • Foreign Exchange Station (FXS) Loop Start, Ground Start, Kewl Start
  • Foreign Exchange Office (FXO) Loop Start, Ground Start, Kewl Start
  • PRI Network and CPE
  • Echo-cancellation Module (VPMOCT128)

© 2024, KM LOGITEL Innovative Technologies SA. All rights reserved. Report a Problem
    X
    Glad to have you at Our Website
    Welcome to logitel
    Site SearchSend Us Email
    wpChatIcon